Solution home DreamScape DreamGuard Protective Topcoat
How do I apply DreamGuard? Print
Modified on: Mon, Aug 31, 2020 at 2:52 PM
Instructions for application of DreamGuard to your printed image.
An early word of caution: A little DreamGuard goes a long way - Do not over apply!
Whether applying with a machine or a roller, we recommend using one thin layer of the coating on your wallcovering product. For manual application, we suggest a low nap or foam roller. Test which works best on a scrap or safe area of the image.
CAUTION: Over application can result in a cloudy effect that will not clear.
Cleaning and sterilizing: NOTE: DreamGuard coating can be damaged by alcohol
Always test a small section of the DreamGuard protected wallcovering first. Evaluate the test surface for changes before applying to the entire wall.
General cleaning:
Safely use mild soap and water mixture.
Virus and Health Concerns:
Safely clean with Lysol Multi Surface Cleaner.
Safely clean with a 1:10 dilution of bleach to water.
Safely clean with 3 percent hydrogen peroxide solution.