It depends on the type of DreamScape product category.
For our traditional fabric backed vinyls ( ie: Bling!, Canvas, Matte, Suede, Terralon)
We do not recommend printing edge to edge or butting seam against seam. For best results you should follow the DreamScape installation instructions which suggest using an overlap and double cut method. We recommend a 1 to 2 inch bleed where the installer will overlap, matching graphics, and double cut a clean seam.
For our self-adhesive WallWrap products (ie: Brilliant, Caviar, Classic, Ravello)
These products are best installed using an overlap. Refer to hang instructions here.