Please click on attachment for actual results for Terralon Indoor Air Quality.

The at

 

 

Product Name: Terralon Non-Vinyl Wallcovering   

 

 

Product Sample Information 

 

Certificate Information 

Company: 

Roysons Corporation 

 

Certificate No: 

220725-02 

Company Website: 

www.roysons.com 

 

Certified By: 

 

Product Type: 

Wallcoverings 

 

Raja S. Tannous, Laboratory Director 

Date Produced: 

6/29/2022 

 

Date: 

July 25, 2022 

Reference Standard: California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 (Emission testing method for CA Specification 01350)  

Acceptance Criteria and Results Demonstrating Compliance of Product Sample to Referenced Standard: 

Exposure Scenario1 

Individual VOCs of Concern2 

Formaldehyde3 

TVOC4 

 

Criterion 

Compliant? 

Criterion 

Compliant? 

Range 

School Classroom 

≤½ Chronic REL 

YES 

≤9.0 µg/m3 

YES 

≤ 0.5 mg/m3 

Private Office 

≤½ Chronic REL 

YES 

≤9.0 µg/m3 

YES 

≤ 0.5 mg/m3 

   Product Coverage5:            Not applicable 

  1. Exposure scenarios & product quantities for classroom & office are defined in Tables 4-2 – 4-5 (CDPH Std. Mtd. V1.2-2017) 
  2. Maximum allowable concentrations of individual target VOCs are specified in Table 4-1 (ibid.) 
  3. Maximum allowable formaldehyde concentration is ≤9 µg/m3, effective Jan 1, 2012; previous limit was ≤16.5 µg/m3 (ibid.) 
  4. Informative only; predicted TVOC Range in three categories, i.e.,  ≤0.5 mg/m3, >0.5 – 4.9 mg/m3, and ≥5.0 mg/m3 
  5. Informative and applicable only to tests of wet-applied products; grams of sample applied per square meter of substrate 

Standards & Codes Recognizing CDPH Standard Method V1.2 (partial list) 

  • USGBC LEED Version 4/4.1, BD&C, ID&C, Residential BD&C Multifamily 
  • The WELL Building Standard, WELL v2, Feature X06 
  • ANSI/GBI 01-2019 Green Globes Assessment Protocol 

 

Narrative: Roysons Corporation selected a sample representative of its Terralon Non-Vinyl Wallcovering product and submitted it on 

7/1/2022 for testing. Berkeley Analytical measured and evaluated the emissions of VOCs from this sample following 

CDPH/EHLB/Standard Method V1.2-2017. The results of the test are presented in Berkeley Analytical report, 241-018-01A-Jul2522. 

Berkeley Analytical is an independent, third-party laboratory specializing in the analysis of organic chemicals emitted by and contained in building products, finishes, furniture, and consumer products. We are an ISO/IEC 17025 accredited laboratory (IAS, TL-383); all standards used in performing this test are in Berkeley Analytical’s scope of accreditation.   

DISCLAIMER: THIS CERTIFICATE OF COMPLIANCE AFFIRMS THAT: 1) A SAMPLE OF THE LISTED PRODUCT WAS TESTED ACCORDING TO THE REFERENCED STANDARD; 

2) THE MEASURED VOC EMISSIONS FROM THE SAMPLE WERE EVALUATED FOR THE DEFINED EXPOSURE SCENARIO(S); AND 3) THE RESULTS MEET THE ACCEPTANCE CRITERIA OF THE REFERENCED STANDARD(S). BERKELEY ANALYTICAL IS NOT RESPONSIBLE FOR ANY CLAIMS REGARDING A PRODUCT OR PRODUCTS ENTERED INTO COMMERCE THAT MAY BE BASED ON THIS TEST. BERKELEY ANALYTICAL PROVIDES THIS CERTIFICATE OF COMPLIANCE “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. 

 

 

©2019 Berkeley Analytical, 815 Harbour Way South, Suite 6, Richmond, CA 94804 / 510-236-2325 / www.berkeleyanalytical.com 

FC17B.2 

 












 

tached report details results from the CA-1350 test, which is also called the CDPH Standard v1.2-2017