Dreamscape Perforation Services

Dreamscape offers a custom service to aid customers seeking perforation for their finished product.  Digital print projects which require a micro-vented wallcovering must be printed first,  and then sent to Dreamscape for additional processing.   The printed material will be run through a process which uses tiny needles to puncture the surface and create nearly invisible holes.  When combined with a mold inhibiting primer and mold inhibiting adhesive,  micro ventilation has been shown to be effective in reducing the chances of mold growth behind a wallcovering or inside the wall cavity. 

COST AND TIME SAVING  -PLEASE LOOK AT THE ALTERNATIVE OPTIONS LISTED AT THE BOTTOM OF THIS PAGE

 


Minimum Order Quantity -  250 linear yards

Minimum Roll Size - 50 yards per individual bolt, larger preferred

Maximum Roll Width - 58”


Working Loss - The microperf process is always subject to unpredictable working loss.   To minimize this loss, Dreamscape will be adding blank leader and footer material to each roll provided.   Additional fees for the leader and footer are described below as a setup cost per roll.   


Lead Time - 2 to 4 weeks, depending on size of request and scheduling 


Perforating Service Fee -         250 -500 yds   = $6.75 per yd  

            501 -999 yds   = $5.75 per yd 

            1000+              = contact us for a quote

            

Leader / Footer Setup Fee - $45 per individual roll


Additional Charges - Customer responsible for incoming and outgoing freight from facility to Dreamscape.  


Limitations -  Customer must be aware that the perforating process will change the overall appearance of the material.  While the punched holes are quite small,  they are visible with close inspection, and the degree of visibility can vary depending on the surface of the material.  There is also an inherent risk of the material being completely destroyed in the hole punching process.  Buyer must assume risk,  as DreamScape will not be held responsible for any damages related to the perforation process and limits refunds to the cost of the perforation service only.  Refunds will exclude any material, printing, or shipping costs.  For this reason, materials that can not be reproduced are not good candidates for perforating. 


*Dreamscape does not offer this service for NON-Dreamscape materials

**Each project should be quoted separately

***Wallwrap self adhesive products are not suitable for this perforation service


AS AN ALTERNATIVE TO PERFORATION,  WE OFFER TWO OPTIONS:

DREAMSCAPE TERRALON PRODUCT HAS A VERY POROUS AND PERMEABLE SURFACE AND HAS ACHIEVED COMPARABLE RESULTS TO MICRO-PERFED VINYL.  TERRALON DOES NOT REQUIRE THE EXTRA STEP OF MICRO PERF TO ALLOW WATER VAPOR TRANSMISSION.  

WE ALSO OFFER A PRODUCT CALLED “PERFECT” WHICH IS PRE-PERFED.  THE DS-PERFECT MATERIAL CAN BE PRINTED ON WITHOUT THE NEED OF FURTHER STEPS.

rev:013124


PDF ATTACHED BELOW.